Four
in One - Getting Started with Lines
The Drawing
CONCEPTS INTRODUCED
·
Setting limits
·
Drawing lines using the @ # < # system
·
Calculating drafting angles
·
Erasing lines
·
Creating temporary lines
·
Using the midpoint of a line
·
Using Escape to exit a command/tool
HINTS (SQUARE)
·
The angles needed are 0, 90,
180 and 270.
HINTS (HOUSE)
·
Create a vertical line from
the middle of the top horizontal line to the peak of the roof. Then draw the roof’s lines. Then erase the vertical line.
HINTS (DIAMOND)
·
The angles are the same as
the angles used in the square but they are all offset by 45 degrees.
HINTS (PLUS)
·
All lines are of length 1.
|